总机外线: 86 025 8337 7360  
产品中心 Products

B64G技术参数

联系我们

B64G技术参数   B64G技术参数


Olympian Plus

 

Filter/Regulator


1/4', 3/8', 1/2', 3/4' Port Sizes



  • Olympian Plus plug in design

  • High Efficiency water and particle removal

  • Quick release bayonet bowl

  • High visibility prismatic sight glass*

  • Push to lock adjusting knob with tamper resistant option

                                                                                               B64G技术参数            


* UK and other patents pending



Technical Data 


Fluid: 

Compressed air 

Maximum pressure:

  Guarded transparent bowl:

    10 bar (150 psig) 

   Metal bowl: 

    17 bar (250 psig)


Operating temperature*:

     Guarded transparent bowl: 

     -20° to +50°C (0° to +125°F)

     Metal bowl: 

    -20° to +80°C (0° to +175°F)

* Air supply must be dry enough to avoid ice formation at temperatures below +2°C (+35°F).


Partical removal:

 5, 25 or 40 µm. Within ISO 8573-1, Class 3  andClass 5


Typical flow at 6,3 bar (90 psig) inlet pressure: 

106 dm3/s (225 scfm)


Automatic drain connection: 

1/8'

 

Automatic drain operating conditions:

     Minimum pressure: 0,7 bar (10 psig).

     Drain opens when bowl pressure drops below 0,2 bar (3 psig). 

     Minimum air flow: 1 dm3/s (2 scfm) required to close drain.


Gauge Ports:

    1/8' PTF with PTF main ports

    1/8' ISO Rc with ISO Rc main ports

    1/8' ISO Rc with ISO G main ports 


Nominal bowl size:

0,2 litre (7 fluid ounce)

Materials:

    Body: Zinc Bonnet

    Aluminium Valve: 

     Brass Yoke: Zinc

     Metal bowl: Aluminium

     Standard metal bowl prismatic liquid level indicator lens: Grilamid

     Optional metal bowl sight glass: Pyrex 

    Optional transparent bowl: Polycarbonate

    Element: Sintered plastic

    Elastomers: Synthetic rubber


Ordering Information

See Ordering Information on the following pages.


ISO Symbols


B64G技术参数


B64G技术参数

B64G技术参数

B64G技术参数


Dimensions mm (inches)

Panel mounting hole diameter: 52 mm (2.06')

Panel thickness: 0 to 6 mm (0' to 0.25')

B64G技术参数


B64G技术参数



Dimensions mm (inches)

Panel mounting hole diameter: 52 mm (2.06') Panel thickness: 0 to 6 mm (0' to 0.25')

* Reduces by 4 mm (0.16') with knob in locked position. Add 37 mm (1.46') for unit with ‘T’ handle

†   Minimum clearance required to remove bowl.

**  157 mm (6.18') for G3/4 models


Bracket Mounting

Use 8 mm (5/16') screws to mount bracket to wall.

B64G技术参数

B64G技术参数


Service Kits

 

Item

Type

Part Number

Service kit


Relieving


4383-200


Non relieving


4383-201

 

Replacement  elements

5 µm

4338-01

25 µm

4338-99

40 µm

4338-02

Replacement Sight Glass

Prismatic (standard)

4380-040

Pyrex

4380-041

Replacement Drains

Automatic

3000-97

Manual

684-84

Service kit includes diaphragm assembly, valve assembly, valve spring, louvre o-ring, bowl o-ring, drain seal.




Warning

These products are intended for use in industrial compressed air systems only. Do not use these products where pressures and temperatures can exceed those listed under ‘Technical Data’.

Before using these products with fluids other than those specified, for non-industrial applications, life-support systems, or other applications not within published specifications, consult NORGREN.

Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure.

System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided.

System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products.

Water vapor will pass through these units and will condense into liquid if air temperature drops in the downstream system. Install an air dryer if water condensation could have a detrimental effect on the application.


Copyright ©2018 - 2020南京德蒙森自控工程有限公司
犀牛云提供企业云服务
全国客服热线 025 8337 7360