总机外线: 86 025 8337 7360  
产品中心 Products

B73G技术参数

联系我们

B73G技术参数B73G技术参数




B73G技术参数






                       

  B73G技术参数














EXCELON design allows in-line or modular installation

Quick release bayonet bowl

Highly visible, prismatic liquid level indicator lens

Full flow gauge ports

Balanced valve design minimizes effect of variation in the inlet pressure on the outlet pressure

Modular installations with EXCELON 72, 73, and 74 series can be made to suit particular applications


Technical Data


Fluid: Compressed air


Maximum pressure:


Transparent bowl: 10 bar (150 psig)


Metal bowl: 17 bar (250 psig) 


Operating temperature*:


Transparent bowl: -20°to + 50°C (0°to + 125°F) 


Metal bowl: -20°to + 80°C  (0°to + 175°F)


* Air supply must be dry enough to avoid ice formation at temperatures below +2℃ (+35℉).


Particle removal: 5 µm, 25 µm or 40 µm filter element


Air quality: Within ISO 8573-1, Class 3 and Class 5 (particulates)


Typical flow with 10 bar (150 psig) inlet pressure,6,3 bar (90 psig) set pressure and 1 bar (15 psig) droop from set: 50 dm3/s (106 scfm)


Manual drain connection: 1/8'


Automatic drain connection: 1/8'


Automatic drain operating conditions (float operated):


Bowl pressure required to close drain: Greater than 0,3 bar (5 psig)


Bowl pressure required to open drain: Less than 0,2 bar (3 psig)


Minimum air flow required to close drain: 0,1 dm3/s (0.2 scfm)


Manual operation: Depress pin inside drain outlet to drain bowl


Nominal bowl size: 0,1 litre (3.5 fluid ounce)


Gauge ports:


1⁄4 PTF with PTF main ports 


Rc1/4 with ISO Rc main ports 


Rc1/8 with ISO G main ports



Materials:


Body: Aluminum Bonnet: Aluminum Valve:  Brass Bowl:


Transparent: Polycarbonate Transparent with guard: Polycarbonate,steel 

guard


Metal: Aluminum


Metal bowl liquid level indicator lens: Transparent nylon


Element: Sintered polypropylene Elastomers: Neoprene and nitrile


Ordering Information


See Ordering Information on the following pages.


B73G技术参数


B73G技术参数


B73G技术参数


B73G技术参数

B73G技术参数


Dimensions mm (inches)


Panel mounting hole diameter: 48 mm (1.89' ) 


Panel thickness: 2 to 6 mm (0.06' to 0.25' )


B73G技术参数


* Minimum clearance to remove bowl


B73G技术参数


B73G技术参数


warning


These products are intended for use in industrial compressed air systems only. 


Do not use these products where pressures and temperatures can exceed those listed under ‘Technical Data’.


Before using these products with fluids other than those specified,fornonindustrial applications, life-support systems, or other applications not within published specifications, consult Norgren.


Through misuse, age, or malfunction, components used in fluid power systems can fail in various modes. The system designer is warned to consider the failure modes of all component parts used in fluid power systems and to provide adequate safeguards to prevent personal injury or damage to equipment in the event of such failure.


System designers must provide a warning to end users in the system instructional manual if protection against a failure mode cannot be adequately provided.


System designers and end users are cautioned to review specific warnings found in instruction sheets packed and shipped with these products.


Water vapor will pass through these units and will condense into  liquid

if air temperature drops in the downstream system. Install an air dryer if water condensation could have a detrimental effect on the application.



Copyright ©2018 - 2020南京德蒙森自控工程有限公司
犀牛云提供企业云服务
全国客服热线 025 8337 7360